ETCR6000 AC/DC Clamp Meter

AC/DC Clamp Leaker 1.Range:0mA~60.0A(AC/DC),Accuracy:1% 2.Data upload:RS232 interface 3.Data memory:99sets 4.Clamp:7mm

ETCR6000 AC/DC Clamp Leaker

Model: ETCR6000Name: AC/DC Clamp LeakerFeatures: Measurement of AC/DC current, leakage current, Current range: DC/AC 0mA-60.0A, Resolution: 1mA, Clamp size: Φ7mm, the small clamp is suitable for line densely places. Data storage: 99 sets, with RS232

Introduction

ETCR6000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current; by adopting up-to-date CT technology and digital integration technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world. The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. it is an essential tool for electrician safety testing.ETCR6000 AC/DC Clamp Leaker also named: DC Leakage Current Clamp Meter, Car DC Leakage Current Clamp Meter, AC/DC Clamp Leakage Current Tester. It has those functions as data holding and data storage. It obtains one RS232 interface, communication cable and software, through which historical data inquiry is available, for reading, saving and printing.  Technical Specifications

Function	Measurement of AC/DC current, leakage current
Power Supply	Zn-Mn dry battery,6F22,9V
Test Mode	Clip-on CT, integral mode
Clamp Size	Φ7mm
Measurement Range	0mA-60.0A AC/DC
Resolution	1mA AC/DC
Accuracy	±2%rdg±5dgt (23°C±5°C, below 75%rh)
Display Mode	Four digits LCD display
Dimension	LWH: 168mm×65mm×34mm
LCD Dimension	35mm×21.5mm; display domain: 32mm×15mm
Sampling Rate	2 times/s
Frequency	AC: 45Hz-400Hz
Polarity Indication	DC current auto identified and display“ — ”
Test Position	Tested wire in the jaw center
Range Shift	Automatically
Line Voltage	AC600V
RS232 Interface	Data stored in the memory of the meter via RS232 upload to PC
Com-Configure	Baud rate:9600, data bit:8, stop bit:1
Data Memory	99units, FULL blinks when the memory is full
Reading Hold	DH indicating the reading is hold
Out of Range	OL indicating the current is out of range
Auto Power-off	5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage	Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Weight	180g (including the battery)
Working Current	10mA
Consumption	10mW
Working Temperature and Humidity	-10°C-50°C,below 80%rh
Limit Temperature Error	-10°C-0°C and 40°C-50°C, within 2%rdg
Storage Temperature and Humidity	-10°C-60°C,below 70%rh
Insulating Strength	AC2kV/rms (between the alloy of the clamp and the housing)
Applicable safety rules	IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

  Field Application

ETCR6000 AC/DC Clamp Meter